Glacier bay FW0AC000CP Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
Remove the pop up stopper (P) and drain flange (L)
from the drain body (O).
Screw the lock nut (N) all the way down, and push the
rubber washer (M) down.
1
M
N
O
P
L
2
4
Installing the drain body
Apply silicone sealant (not included) under the drain
flange (L) and place the drain flange (L) over the
drain hole in the sink.
From underneath the sink, screw the drain body (O)
onto the drain flange (L). Ensure that the opening (1)
for the ball rod on the drain body (O) faces towards
the rear of the sink.
Tighten the rubber washer (M) and lock nut (N) on
the drain body (O).
M
5
L
1
1
N
O
HOMEDEPOT.COM/GLACIERBAY