Descargar Imprimir esta página

HAGER WERKEN LOGIC Información De Uso página 4

Gafas de protección

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
of the PPE. Please use our Astro Clean (spray disinfectant REF 554 301).
- Store the PSA at temperatures of 5° C and 40° C in a dry and dust-free surrounding in its original
packaging. Keep in a dry place and do not expose to direct sunlight or heat in order to keep the
produce free from damage.
- Keep the instructions of use and the PPE in its original packaging.
- In conformity with Directive 89/686/EEC and EN 166 standard specifications. Please find the
PPE's identification code stated on its packaging.
- Details regarding the PPE's suitability are stated on the product and can also be found on the
packaging.
- Please find explanation for the abbreviation in the following manual ("Characteristics of the
glasses")
- The complete pair of safety glasses has to be classified with the lower grade if symbols F and B do
not refer to both, the lens and the frame.
Any changes to the PPE not carried out by the manufacturer as well as any failure to adhere to the
instructions will be equated with improper and not permitted use. Any replacement equipment has
to be ordered from Hager & Werken. It is for Hager & Werken to decide whether a part can be sub-
stituted or replaced. Defect components, resulting from improper handling, are non-returnable.
Characteristics of the glasses:
An abbreviation according to harmonised standard EN 166 is imprinted on the protective glass:
HW 1 F CE. The temple arms are imprinted with the following abbreviation: HW EN166 F CE. You
also find the model details given on the temple arms (6-digit row of numbers).
HW
Abbreviation for the European representative – Responsible within the EU:
Hager & Werken GmbH & Co. KG, Ackerstr.1, 47269 Duisburg, Germany
1
Optical class – For work requiring extra good visual function
F
Mechanical strength – Resistant to high-speed (45m/s) particles
CE
Conformity Mark – Type-examination certificate is available for the products, in con-
formity with European Guideline 89/686/EWG (personal protective equipment)
EN 166 Conformity Mark – Products are in accordance with harmonised standard EN 166
355 616
355 617 Model description – (matches the REF number)
355 618
Durability:
If given instructions regarding use, storage and cleaning are observed, the article can be used for
approximately 6 months after removal of packaging. It is recommended to exchange the product
after five years' storage; earlier in case of defects. It is not permitted to use the PPE outside the areas
of application stated in these instructions of use and on the packaging. Sensitive persons wearing
the PPA may suffer from allergic reactions if their skin comes into contact with the material.
Parkson Safety Industrial Corp., 4F-21, Sec 5, No. 5, Sinyi Rd, Taipei City 110, Taiwan
Helmut Feldtmann GmbH, Zunftstraße 28, 21244 Buchholz
Distribution Hager & Werken GmbH & Co. KG, Ackerstr. 1, 47269 Duisburg
H&W Logic
355 616
H&W Panorama II
355 617
H&W OTG II
355 618

Publicidad

loading

Productos relacionados para HAGER WERKEN LOGIC

Este manual también es adecuado para:

Panorama iiOtg ii355 616355 617355 618