Sauder 421192 Manual Del Usuario página 33

Step 28
NOTE: A corner of the unit is cut out to show part of the assembly.
å
Place the DOOR TRACK TUBE (108M) with the DOORS (O and P) onto the
å
DOOR TRACK SUPPORTS (105M).
Carefully pull the bottom of the DOORS (O and P) out at an angle. Then,
å
push up on the RETAINING BARS (155M) on the bottom edge of the
DOORS and insert the RETAINING BARS into the DOOR TRACK (107M).
Then, press down on the RETAINING BARS.
Now, fasten the DOOR TRACK TUBE (108M) to the outer DOOR TRACK
å
SUPPORTS (105M). Use two BROWN 1/2" PAN HEAD SCREWS (125S).
107M
155M
www.sauder.com/service
BROWN 1/2" PAN HEAD SCREW
P
108M
125S
(2 used in this step)
O
421192
105M
Page 33