Sauder 427287 Manual De Instrucciones
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. 427287
  6. Manual de instrucciones
Sauder 427287 Manual De Instrucciones

Sauder 427287 Manual De Instrucciones

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Executive Desk
Summit Station Collection | Model 427287
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-523-3987
.
Business or pleasure.
Works both ways.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-52
Français pg 53-58
Español pg 59-64
Lot # 543218
Purchased: __________________
03/10/20

Publicidad

Tabla de contenido
loading

Manuales relacionados para Sauder 427287

Resumen de contenidos para Sauder 427287

  • Página 1 Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays) Business or pleasure. Works both ways. Executive Desk NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Summit Station Collection | Model 427287 PLEASE READ AND KEEP FOR FUTURE REFERENCE. Sauder.com English pg 1-52 Français pg 53-58 Español pg 59-64...
  • Página 2 SMALL LEFT DRAWER SIDE (2) FRONT MOLDING (2) BACK MOLDING (2) RIGHT DRAWER SIDE (2) LEFT FRONT/RIGHT REAR LEG (4) TOP (1) LEFT DRAWER SIDE (2) DRAWER FRONT (2) SMALL DRAWER BACK (2) SMALL DRAWER FRONT (2) Page 2 427287 www.sauder.com/service...

  • Página 3: Part Identification

    Now you know Part Identification our ABCs. D716 D109 D716 D716 www.sauder.com/service 427287 Page 3...
  • Página 4 CAM - 24 FASTENER - 24 SCREW - 24 DOWEL - 16 DOWEL - 4 EXTENSION BUMPER GROMMET PULL - 7 GROMMET - 1 HINGE - 2 BRACKET - 4 CARD - 1 CAP - 1 Page 4 427287 www.sauder.com/service...

  • Página 5: Tabla De Contenido

    30S BLACK 1-9/16" FLAT HEAD SCREW - 24 SILVER 5/8" FLAT HEAD SCREW - 4 BLACK 9/16" FLAT HEAD SCREW - 14 BLACK 7/8" MACHINE SCREW - 14 113S BLACK 1-15/16" FLAT HEAD SCREW - 4 SILVER 9/16" LARGE HEAD SCREW - 2 www.sauder.com/service 427287 Page 5...
  • Página 6 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
  • Página 7 Push a HIDDEN CAM into Insert the CAM SCREW into the HIDDEN CAM. the part. The arrow in the Tighten the HIDDEN CAM. HIDDEN CAM must point toward the hole in the edge of the board. Hole www.sauder.com/service 427287 Page 7...
  • Página 8 å Carefully turn the LEFT END (B) and LEFT UPRIGHT (D) over. å Push six SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the LEFT END (B) and LEFT UPRIGHT (D). å Push twelve HIDDEN CAMS (1F) into the LEFT END (B) and LEFT UPRIGHT (D).
  • Página 9 Step 3 å Turn twelve CAM SCREWS (8F) into the LEGS (H and K) as shown. å Insert four WOOD DOWELS (15F) into the LEGS (H and K). (12 used) www.sauder.com/service 427287 Page 9...
  • Página 10 NOTE: Be sure the WOOD DOWELS in the LEGS insert into the LEFT END. i t h Angled edge Edge with f a c S u r D E N TWIST-LOCK® H I D FASTENERS These surfaces should be even. Angled edge Page 10 427287 www.sauder.com/service...
  • Página 11 NOTE: Be sure the WOOD DOWELS in the LEGS insert into the LEFT UPRIGHT. S u r f a c H I D Angled edge Edge with D E N i t h TWIST-LOCK® FASTENERS These surfaces should be even. Angled edge www.sauder.com/service 427287 Page 11...
  • Página 12 LEFT END (B). Use eight GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4. GOLD 5/16" FLAT HEAD SCREW (8 used for the RAILS) Roller end This hole must be here. Roller end This hole must be here. Page 12 427287 www.sauder.com/service...
  • Página 13 NOTE: The EXTENSION SLIDES (35MC) will be used later for the LARGE DRAWERS. 35MC 35MA Push the black lever in and pull the SLIDE from the RAIL. Open end GOLD 5/16" FLAT HEAD SCREW (4 used for the RAILS) Open end www.sauder.com/service 427287 Page 13...
  • Página 14 Carefully turn the LEFT UPRIGHT (D) over. å Fasten two EXTENSION BRACKETS (43G) to the LEFT UPRIGHT (D). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 14 427287 www.sauder.com/service...
  • Página 15 Fasten the CABINET LEFT (40AX) to the BRACKETS on the LEFT UPRIGHT (D) exactly as shown. Use two GOLD 5/16" FLAT HEAD SCREWS (3S). GOLD 5/16" FLAT HEAD SCREW (2 used for the RAIL) Roller end Use these holes. www.sauder.com/service 427287 Page 15...
  • Página 16 NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again. BLACK 9/16" FLAT HEAD SCREW (2 used in this step) Shoulder Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the BACK. Page 16 427287 www.sauder.com/service...
  • Página 17 Step 11 å Push four SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the BACK (G). å Insert one WOOD DOWEL (15F) into the LEFT END (B). å Fasten the BACK (G) to the LEFT END (B). Tighten two TWIST-LOCK®...
  • Página 18 Step 12 å Push two SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in one of the BOTTOMS (F). å Insert one SMALL WOOD DOWEL (26F) into the LEFT END (B). å Fasten the BOTTOM (F) to the LEFT END (B). Tighten one TWIST-LOCK®...
  • Página 19 Slide a FRONT MOLDING* (J) onto the notched edge of the BOTTOM (F). å *U.S. Patent No. 5,499,886 The groove is closer to this edge. Slide the FRONT MOLDING (J) onto the notched edge. These surfaces should be even. Notched edge www.sauder.com/service 427287 Page 19...
  • Página 20 Insert one WOOD DOWEL (15F) into the BACK (G). å Fasten the LEFT UPRIGHT (D) to the BOTTOM (F) and BACK (G). Tighten three TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the BOTTOM and BACK insert into the UPRIGHT. Page 20 427287 www.sauder.com/service...
  • Página 21 Meet Part (V). This component has been engineered to be lighter, stronger, faster… well ok. Not technically faster. But definitely makes for a sturdier Executive Desk that’ s easier to assemble and friendlier to the environment. www.sauder.com/service 427287 Page 21...
  • Página 22 NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again. BLACK 9/16" FLAT HEAD SCREW (2 used in this step) Shoulder Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the MODESTY PANEL. Page 22 427287 www.sauder.com/service...
  • Página 23 Fasten the MODESTY PANEL (E) to the LEFT UPRIGHT (D). Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 113S BLACK 1-15/16" FLAT HEAD SCREW (2 used in this step) www.sauder.com/service 427287 Page 23...
  • Página 24 NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again. BLACK 9/16" FLAT HEAD SCREW (4 used in this step) Shoulder Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the END and UPRIGHT. Page 24 427287 www.sauder.com/service...
  • Página 25 å Carefully turn the RIGHT END (A) and RIGHT UPRIGHT (C) over. å Push six SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the RIGHT END (A) and RIGHT UPRIGHT (C). å Push twelve HIDDEN CAMS (1F) into the RIGHT END (A) and RIGHT UPRIGHT (C).
  • Página 26 Step 20 å Turn twelve CAM SCREWS (8F) into the remaining LEGS (H and K) as shown. å Insert four WOOD DOWELS (15F) into the LEGS (H and K). (12 used) Page 26 427287 www.sauder.com/service...
  • Página 27 NOTE: Be sure the WOOD DOWELS in the LEGS insert into the RIGHT END. S u r f a c H I D Angled edge Edge with D E N i t h TWIST-LOCK® FASTENERS These surfaces should be even. Angled edge www.sauder.com/service 427287 Page 27...
  • Página 28 NOTE: Be sure the WOOD DOWELS in the LEGS insert into the RIGHT UPRIGHT. i t h Angled edge Edge with f a c S u r D E N TWIST-LOCK® H I D FASTENERS These surfaces should be even. Angled edge Page 28 427287 www.sauder.com/service...
  • Página 29 RIGHT UPRIGHT (C). Use eight GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4. GOLD 5/16" FLAT HEAD SCREW (8 used for the RAILS) Roller end This hole must be here. Roller end This hole must be here. www.sauder.com/service 427287 Page 29...
  • Página 30 EXTENSION RAIL in to find the other hole that lines up with the hole in the END and UPRIGHT. Turn a SCREW into this hole. Open end GOLD 5/16" FLAT HEAD SCREW (4 used for the RAILS) Open end Page 30 427287 www.sauder.com/service...

  • Página 31: Black 9/16" Large Head Screw

    Carefully turn the RIGHT UPRIGHT (C) over. å Fasten two EXTENSION BRACKETS (43G) to the RIGHT UPRIGHT (C). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) www.sauder.com/service 427287 Page 31...

  • Página 32: Gold 5/16" Flat Head Screw

    Fasten the CABINET RIGHT (40AW) to the BRACKETS on the RIGHT UPRIGHT (C) exactly as shown. Use two GOLD 5/16" FLAT HEAD SCREWS (3S). GOLD 5/16" FLAT HEAD SCREW (2 used for the RAIL) Roller end Use these holes. Page 32 427287 www.sauder.com/service...
  • Página 33 NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again. BLACK 9/16" FLAT HEAD SCREW (2 used in this step) Shoulder Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the BACK. www.sauder.com/service 427287 Page 33...
  • Página 34 Step 28 å Push four SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the BACK (G). å Insert one WOOD DOWEL (15F) into the RIGHT END (A). å Fasten the BACK (G) to the RIGHT END (A). Tighten two TWIST-LOCK®...
  • Página 35 Step 29 å Push two SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the remaining BOTTOM (F). å Insert one SMALL WOOD DOWEL (26F) into the RIGHT END (A). å Fasten the BOTTOM (F) to the RIGHT END (A). Tighten one TWIST-LOCK®...
  • Página 36 Slide a FRONT MOLDING* (J) onto the notched edge of the BOTTOM (F). å *U.S. Patent No. 5,499,886 The groove is closer to Slide the FRONT MOLDING (J) this edge. onto the notched edge. These surfaces should be even. Notched edge Page 36 427287 www.sauder.com/service...
  • Página 37 Insert one WOOD DOWEL (15F) into the BACK (G). å Fasten the RIGHT UPRIGHT (C) to the BOTTOM (F) and BACK (G). Tighten three TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the BOTTOM and BACK insert into the UPRIGHT. www.sauder.com/service 427287 Page 37...
  • Página 38 Fasten the RIGHT UPRIGHT (C) to the MODESTY PANEL (E). Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 113S BLACK 1-15/16" FLAT HEAD SCREW (2 used in this step) Page 38 427287 www.sauder.com/service...

  • Página 39: Brown 1-1/2" Flat Head Screw

    Fasten the KEYBOARD DRAWER BACK (O) to the KEYBOARD DRAWER BOTTOM (P). Use two BROWN 1-1/2" FLAT HEAD SCREWS (14S). Finished surface These holes must be facing up. BROWN 1-1/2" FLAT HEAD SCREW (6 used in this step) www.sauder.com/service 427287 Page 39...

  • Página 40: Silver 5/8" Flat Head Screw

    Step 34 å Fasten the HINGES (12H) to the KEYBOARD DRAWER FRONT (N). Use four SILVER 5/8" FLAT HEAD SCREWS (23S). SILVER 5/8" FLAT HEAD SCREW (4 used in this step) Page 40 427287 www.sauder.com/service...

  • Página 41: Silver 9/16" Large Head Screw

    KEYBOARD DRAWER BOTTOM (P). Use two SILVER 9/16" LARGE HEAD SCREWS (54S). å Peel the BUMPERS from the BUMPER CARD (29M) and stick the BUMPERS on the KEYBOARD DRAWER SIDES (Q) as shown. SILVER 9/16" LARGE HEAD SCREW (2 used in this step) www.sauder.com/service 427287 Page 41...
  • Página 42 Fasten one PULL (35K) to the KEYBOARD DRAWER FRONT (N). Use two BLACK 7/8" MACHINE SCREWS (37S). Roller end BLACK 7/8" MACHINE SCREW (2 used for the PULL) Roller end BROWN 1" FLAT HEAD SCREW (4 used for the SLIDES) Page 42 427287 www.sauder.com/service...

  • Página 43: Black 1-9/16" Flat Head Screw

    Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D14 and D15). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the LARGE DRAWER BACK (D78). å Repeat this step for the other LARGE DRAWER. www.sauder.com/service 427287 Page 43...
  • Página 44 SLIDES with holes in DRAWER SIDES Open end Open end BLACK 7/8" MACHINE SCREW (4 used for the PULLS) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (8 used for the SLIDES) Center the screw in the oval hole. Page 44 427287 www.sauder.com/service...
  • Página 45 Step 39 å Press the FILE GLIDES (4B) onto the LARGE DRAWER SIDES (D14 and D15). www.sauder.com/service 427287 Page 45...
  • Página 46 Fasten the DRAWER BACK (D109) to the DRAWER SIDES (D24 and D25). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the DRAWER BACK (D109). å Repeat this step for the other DRAWER. Page 46 427287 www.sauder.com/service...
  • Página 47 SLIDES with holes in DRAWER SIDES Roller end Roller end BLACK 7/8" MACHINE SCREW (4 used for the PULLS) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (8 used for the SLIDES) Center the screw in the oval hole. www.sauder.com/service 427287 Page 47...
  • Página 48 Fasten the SMALL DRAWER BACK (D74) to the SMALL DRAWER SIDES (D20 and D21). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). å NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the SMALL DRAWER BACK (D74). å Repeat this step for the other SMALL DRAWER. Page 48 427287 www.sauder.com/service...

  • Página 49: Black 7/8" Machine Screw

    SLIDES with holes in DRAWER SIDES Roller end Roller end BLACK 7/8" MACHINE SCREW (4 used for the PULLS) Drawer Slide GOLD 5/16" FLAT HEAD SCREW (8 used for the SLIDES) Center the screw in the oval hole. www.sauder.com/service 427287 Page 49...
  • Página 50 The drawer will push in hard until it is all the way in, then it will slide in and out easier. Place the roller on the SLIDE behind the roller on the RAIL. Page 50 427287 www.sauder.com/service...
  • Página 51 Step 45 å Insert the GROMMET (10P) and GROMMET CAP (1P) into the large hole in the TOP (V). 35 lbs. 35 lbs. www.sauder.com/service 427287 Page 51...
  • Página 52 å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn maximum in both the clockwise and counter-clockwise directions to make adjustments, and then tighten screw #3.

  • Página 53: Liste De Pièces

    Modèle 427287 Bureau exécutif Utilisez les instructions d’ a ssemblage en français avec les NOUS CONTACTER EN PREMIER schémas étape par étape du manuel d’instruction en anglais. AVANT D'EFFECTUER TOUT RETOUR AU MAGASIN. Chaque étape en français correspond à la même étape en Nous faisons de notre mieux pour nous assurer que votre meuble anglais.
  • Página 54 Ne pas serrer les FIXATIONS TWIST-LOCK® à cette étape. Avec précaution, retourner l'EXTRÉMITÉ GAUCHE (B) et le MONTANT GAUCHE (D). Enfoncer six FIXATIONS TWIST-LOCK® SAUDER (7F) dans les gros trous de l'EXTRÉMITÉ GAUCHE (B) et du MONTANT GAUCHE (D). Enfoncer douze EXCENTRIQUES ESCAMOTABLES (1F) dans l’EXTRÉMITÉ...
  • Página 55 ÉTAPE 16 ÉTAPE 11 Faire tourner deux VIS TÊTE PLATE 14 mm NOIRES (32S) dans Enfoncer quatre FIXATIONS TWIST-LOCK® SAUDER (7F) dans les le VOILE DE FOND (E) jusqu'à ce que les épaulements des VIS gros trous dans l’ARRIÈRE (G).
  • Página 56 MONTANT DROIT (C). Fixer deux CONSOLES D'EXTENSION (43G) au MONTANT Enfoncer six FIXATIONS TWIST-LOCK® SAUDER (7F) dans les gros DROIT (C). Utiliser quatre VIS TÊTE LARGE 14 mm NOIRES (1S). trous de l'EXTRÉMITÉ DROITE (A) et du MONTANT DROIT (C).
  • Página 57 ÉTAPE 29 ÉTAPE 34 Enfoncer deux FIXATIONS TWIST-LOCK® SAUDER (7F) dans les Fixer les CHARNIÈRES (12H) au DEVANT DE TIROIR DE CLAVIER (N). gros trous l’ a utre DESSOUS (F). Utiliser quatre VIS TÊTE PLATE 16 mm ARGENTÉES (23S). Insérer une PETITE CHEVILLE EN BOIS (26F) dans ÉTAPE 35...
  • Página 58 REMARQUE : Prière de lire les informations importantes sur la dans la rainure de l'ARRIÈRE DE PETIT TIROIR (D74). sécurité figurant sur les pages arrière du manuel d’instructions. Répéter cette étape pour l'autre PETIT TIROIR. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. Page 58 427287 www.sauder.com/service...

  • Página 59: Escritorio Ejecutivo

    40CB GABINETE IZQUIERDO ..........4 EXTREMO IZQUIERDO ..........1 necesita ponerse en 40CC CAJÓN DERECHO .............4 PARAL DERECHO ............1 contacto con Sauder en 40CD CAJÓN IZQUIERDO ..........4 PARAL IZQUIERDO .............1 cuanto a esta unidad, (JUEGO DE EXTENSIÓN SE MUESTRA POR SEPARADO) D14 LADO DERECHO DE CAJÓN GRANDE ..2 35MA RIEL DE EXTENSIÓN ..........4...
  • Página 60 NOTA: Las CORREDERAS DE EXTENSIÓN (35MC) se utilizarán IZQUIERDO (D) al revés. más tarde para los CAJONES GRANDES. Empuje seis SUJETADORES TWIST-LOCK® SAUDER (7F) en los agujeros grandes del EXTREMO IZQUIERDO (B) y del PARAL IZQUIERDO (D). Empuje doce EXCÉNTRICOS ESCONDIDOS (1F) en el EXTREMO IZQUIERDO (B) y el PARAL IZQUIERDO (D).
  • Página 61 PASO 12 PASO 17 Empuje dos SUJETADORES TWIST-LOCK® SAUDER (7F) en los agujeros grandes en uno de los FONDOS (F). Fije el VELO DE FONDO (E) al PARAL IZQUIERDO (D). Utilice dos Inserte un PASADOR DE MADERA PEQUEÑO (26F) en el TORNILLOS NEGROS DE CABEZA PERDIDA de 50 mm (113S).
  • Página 62 PASO 26 DERECHO (C) al revés. Fije el GABINETE IZQUIERDO (40AW) a las MÉNSULAS sobre el Empuje seis SUJETADORES TWIST-LOCK® SAUDER (7F) en los agujeros grandes del EXTREMO DERECHO (A) y del PARAL DERECHO (C) exactamente como se muestra. Utilice dos PARAL DERECHO (C).
  • Página 63 PASO 29 PASO 34 Empuje dos SUJETADORES TWIST-LOCK® SAUDER (7F) dentro Fije las BISAGRAS (12H) a la CARA DE CAJÓN DE TECLADO (N). de los agujeros grandes del FONDO (F). Utilice cuatro TORNILLOS PLATEADOS DE CABEZA PERDIDA de 16 mm (23S).
  • Página 64 NOTA: Asegúrese de que el FONDO DE CAJÓN (D716) ajuste dentro de la ranura del DORSO DE CAJÓN PEQUEÑO (D74). Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Repita este paso para el otro CAJÓN PEQUEÑO. Page 64 427287 www.sauder.com/service...
  • Página 65 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/service 427287 Page 65...
  • Página 66 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 66 427287 www.sauder.com/service...

  • Página 67: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 68 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.

Tabla de contenido