Beamz DMX65W Manual De Usuario página 7

This controller has a wireless DMX transmission on board which operates on 2.4Ghz frequency band. The controller acts as a transmitter and needs
a receiver (item 154.077 BPP Wireless DMX Transmitter/Receiver) or Beamz fixture with built-in 2.4Ghz DMX transmission.
To activate wireless DMX:
Press button,
Select
Note: Keeps DMX address standard at value "1", in complex installation you can change start address.
Select
Select
Select and press
Ready? Go back to the "main" menu with
1
2
3
4
5
6
7
Note: If you want to turn off the LED indicator near the display, you can easily do this by going to
press button to select "OFF".
Operation examples:
With this controller you are able to create 8 different chases with 15steps each, play chase with adjustable speed and fade time.
Create your own chase:
Press button,
Select and confirm with
Select and confirm with
Select your chase ID with
Select
Before we go further you need to know each function in OLED display:
and confirm with button,
and confirm with button,
and press button to switch between "ON" and "OFF".
button to select your wireless DMX universe with number 1 to 7.
button.
Red 1 ~ 512
Green 1 ~ 512
Yellow 1 ~ 512
Blue 1 ~ 512
Magenta 1 ~ 512
Cyan 1 ~ 512
White 1 ~ 512
button,
button,
or button and confirm with
and confirm with button.
, ,
button,
and