Beamz DMX65W Manual De Usuario página 9

For longer operation and to save battery energy, you can automatically switch off OLED display after no operation has taken place for a certain
period of time.
Set your display battery saver:
Press button,
Select
Select and confirm with
Select
Select
Select your time between 3 till 255 seconds with
Ready? Go back to the "main" menu with
When used in public spaces, unauthorized persons can consciously or unconsciously change the lighting settings. This is usually undesirable and
you can therefore set a password.
Set your password:
Press button,
Select
Select
Select
Fill in the standard password
Now you can create your own password with
Ready? Go back to the "main" menu with
Ground Pin 1 connect with
Signal - Pin 2 connect with
Signal + Pin 3 connect with
Ground Pin 1 connect with
Signal - Pin 2 connect with
Signal + Pin 3 connect with
When fabricating your own cables, always observe the illustrations on this page. Never connect the shielding of the cable to the ground contact of
the plug, and always make certain that the shielding does not come into contact with the aluminium or metal housing of the plug. If the shielding is
connected to the ground, this can lead to short-circuiting and system malfunctions.
The product is maintenance-free, except for incidental cleaning. For cleaning you can use a lint-free, damp cloth. Refer repairs to an authorised
Beamz specialist.
and confirm with button,
button,
and select "ON", "OFF" or "LOGO" with
and confirm with button,
button.
and confirm with button,
and select "ON" or "OFF" with
and confirm with
, ,
button.
Pin 4
Pin 2
Pin 3
7 & 8
2, 4 & 6
1, 3, & 5
button,
or button and confirm with
button,
button,
, .
, , or buttons.
button.