Bosch Fontus 18V Manual Original página 16

Ocultar thumbs Ver también para Fontus 18V:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
16 | English
Connect the hose (4) to the water outlet (9) and the spray
gun (18) (see figure F).
Select the desired spray pattern by rotating the nozzle head
(1) (see figure I).
Select the desired jet strength with the pressure selector
(12) (see figure H).
Press the On/Off switch (13) and pull and hold the trigger
(2) until water comes out (see figure G).
Note: It can take up to 10 seconds for water to come out
when the product is first used after the water tank has been
emptied.
Autostop Function
The machine is designed to switch off the motor as soon as
the spray-gun trigger (2) is released.
Troubleshooting
Cordless pressure cleaner
Problem
Possible Cause
Machine does not
Battery discharged
power up
Battery too hot/cold
Machine frozen
Pressure pulsating
Blocked nozzle
Air in pump
Motor running but no
Water tank empty
or limited working
Pump not vented
pressure
Power indication lights
The auto-off function has been activated
up but pump no longer
running
Machine switches off
The autosleep function has been activated
Battery discharged
Water leaks from ma-
Leaking pump
chine
Leaking connections
Filler cap untight
Motor starts in standby
Pump, spray gun or hose leaking
mode
Hose cannot be re-
When machine is still switched on, pressure in
moved
system increases the required force to remove
connectors
Tank is not being filled,
Water hose and/or hose connection is clogged or
although the tap water
blocked
is connected
Battery and charger
F 016 L94 184 | (10.12.2020)
Auto-off Function
The motor switches off when the product runs continuously
for 30 minutes.
Autosleep Function
The machine automatically switches off after 5 minutes
without operation.
Mounting/dismounting the brush (see figure J)
The brush (5) mounts onto the spray gun and makes clean-
ing more effective.
Slide the brush straight onto the spray gun (18). Guide the
upper and bottom clip of the brush into the corresponding
openings on the spray gun.
Remove the brush by pressing the bottom clip upward and
pulling the brush off the spray gun.
Corrective Measure
Recharge battery
Allow to cool/warm
Wait until machine has defrosted
Clean nozzle
Operate machine in turbo-pressure mode with
nozzle set to shower jet until system is air-free
Refill water tank
Press and hold trigger to vent air
Switch machine off and then on again
Press On/Off switch for activation
Recharge battery
Slight water leaks are possible; in case of excess-
ive leaks, contact Bosch Service Centre
Check if connections are properly mounted
Check if filler cap is properly closed
In case of continuous malfunctions in standby
mode, contact Bosch Service Centre
Switch machine off, then pull trigger to release
the pressure
Switch machine off, check and clean water hose
or hose connection
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido