Craftsman 5166 Manual Del Operador página 4

SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL
V
A
Hz
W
min
.../min
NAME
Volts
Amperes
Hertz
Watt
Minutes
Alternating Current
Direct Current
No-load Speed
Class II Construction
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
No-Hands Symbol
No-Hands Symbol
No-Hands Symbol
No-Hands Symbol
Hot Surface
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed,
orbits, etc., per minute
Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
read and understand operator's manual
before using this product.
Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the
blade will result in serious personal injury.
Failure to keep your hands away from the
blade will result in serious personal injury.
Failure to keep your hands away from the
blade will result in serious personal injury.
Failure to keep your hands away from the
blade will result in serious personal injury.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
4