Extel WEDO 76103 Manual De Instrucciones página 20

You can set the device operation to the desired level by adjusting the
LUX button.
Note: Wait for 5 seconds the photoelectric cell stabilizes (CdS), when
you set the LUX button from the day light to the obscurity or vice versa.
Note: once the lighting has been triggered by the detector, for any subse-
quent detection the timer will revert back to the initial timing.
Important: Never remove the detector cover, this may damage the
detector and void any warranty.
If necessary, our technical website is at your disposal
HOTLINE : 0892-35-00-69 (0,337€ttc/min)
Last version of the dowloadable manual in color on :
Setting time:
the time during which the device remains
connected after the detection can be set from (5
-20) seconds to (5 -7) minutes. Turn the TIME
button clockwise to increase timing (from - to
+).
www.cfi-extel.com
www.cfi-extel.com
WEDO 76103 - 04/2013 - V3