Safety Instructions; Parts Description; Before The First Use - Kiwi kht-8442 Manual Del Uso

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer can not be hold responsible for the
damage.
• Do not use this appliance with a damaged cord or plug or when the appliance has
malfunctions, or has been damaged in any manner. To avoid a hazard make sure that a
damaged cord or plug will be replaced by an Competent qualified repair service(*). Do not
repair this appliance
yourself.
• Never move the appliance by pulling the cord and make sure the cord can not become
entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose it is
made for.
• To protect children against the dangers of electrical appliances, please make sure that you
never leave the appliance unattended. Therefore you have to select a storage place for the
appliance where children are not able to grab it. Make sure that the cable is not hanging in a
downward position.
• To protect yourself against an electric shock, do not immerse the cord, plug or
appliance in the water or any other liquid.
• The heater must not be located immediately below a socket-outlet.
• Do not use the appliance with a programmer, timer, separate remote-control
system or any other device that switches the heater on automatically, since a fire risk exists if
the heater is covered or positioned incorrectly.
• In order to avoid overheating, do not cover the heater.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
* Competent qualified repair service: after sales department of the producer or importer or
any person who is qualified, approved and competent to perform this kind of repairs in order
to avoid all danger. In any case you should return the appliance to this repair service.

PARTS DESCRIPTION

1. Control knobs
2. Thermostat knob
3. Handles

BEFORE THE FIRST USE

• Turn the heater on its side and screw on the included legs with the supplied screws.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on
the device matches the local voltage before connecting the de vice. Voltage 220V-240V 50Hz)
3
1
2
4
3