Cleaning And Maintenance - Kiwi kht-8442 Manual Del Uso

• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
• When the device is turned on for the first time, a slight odor will occur. This is normal, ensure
adequate ventilation. This fragrance is only temporary and will disappear soon.
USE
• Put the plug into a grounded outlet and switch on the divice with the controls.
• For low-power heating, switch only the lower switch, the red light comes on.
• Turn the thermostat clockwise to its highest position. If the room themperature is reached,
turn the thermostat switch counter clockwise until you hear a click. The thermostat will keep
the room temperature the same. For high power heating, turn the upper switch, the red light
comes on.
• Never place objects on the heater, such as clothing or towels. Never use the heater in the
bathroom or other wet areas. The air outlets of the heater can be very hot.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance and wait for the appliance to cool down.
• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad
or steel wool, which damages the device.
• Clean the two air outlets (above and below) by using a vacuum cleaner to remove dust from
inside.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
offered at a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute
an important push to the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
KHT 8442 Instruction Manual
5