STOK SCC0070N Manual De Propietario página 10

 Remove the screws and washers from the ends of the
wire base.
 Insert the front end of the wire base into the mounting
hole on the front leg.
 Insert one end of the wire base through the mounting hole
on the attached rear leg.
 Insert the other end of the wire base through the mounting
hole on the second rear leg. Then insert the second rear
leg into the remaining socket.
 Align the holes on the legs with the slots in the socket.
NOTICE:
Do not overtighten screws when attaching legs.
Overtightening screws could damage the firebox.
 Using screws and washers, secure each leg to the firebox.
Securely tighten screws.
SCREW
WIRE
BASE
REAR
LEG
Fig. 6
ASSEMBLY
WASHER
FRONT
LEG
 Install washers and wheels onto the end on the wire base.
 Using screws, secure each wheel to the wire base.
Securely tighten screws.
 Place the grill upright on the floor, so it rests on the wheels
and front leg.
REAR
LEG
WASHER
SCREW
Fig. 7
SCREW
WASHER
WIRE BASE
REAR
LEGS
Fig. 8
10
WIRE
BASE
WHEEL
FRONT
LEG