Descargar Imprimir esta página

Kohler K-1375 Guia De Inicio Rapido página 2

Ocultar thumbs Ver también para K-1375:

Publicidad

Idiomas disponibles

Idiomas disponibles

No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended faucet area
42" (106.7 cm)
2-1/4"
(5.7 cm)
1-1/2" OD
Product Information
Drop-in bath whirlpool
Required accessories:
Jet trim kit
Fixture*:
basin area
Bathing well
50" (127 cm) x
29" (73.7 cm)
water depth
To overflow
16" (40.6 cm)
* Approximate measurements for comparison only.
Pump
Heater
1.5 hp
1.5 kW
* Approximate measurements for comparison only.
Included component:
Cut-out template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
208-240 V, 20 A, 50/60 Hz
1019740-1-C
3" (7.6 cm) x 24" (61 cm)
Flat Faucet Deck
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
K-1375-H2
shown
K-9698
top area
weight
61" (154.9 cm) x
130 lbs
32" (81.3 cm)
(59 kg)
capacity
100 gal
(378.5 L)
V
A*
240
11
113311-7
Note: The Pump protrudes beyond the rim.
36" (91.4 cm)
72" (182.9 cm)
3" (7.6 cm)
Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
1800 lbs (816.5 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
An access panel for the pump/control is required.
If installing a rim mount faucet, make sure there is no interference
with drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
13-1/2"
(34.3 cm)
6-1/2"
(16.5 cm)
3-1/2" (8.9 cm)
22"
(55.9 cm)
2-7/8" (7.3 cm)
Kohler Co.

Publicidad

loading