Replacement Parts List; Parts Diagram - Performance Tool W10011 Manual Del Propietário

MAINTENANCE
Drain water from hoses and compressor tank.
Condensation from the air added to the air tank will accumulate
on the inside of the tank. Eventually this may cause rusting
which will weaken the welds. Water in the air supply line will
cause gumming and power loss. Open the tank and drain
water as necessary by turning the canister upside down. Press
the needle, using a screwdriver, to drain water from tank. The
tank requires a PSI of 10-20 to drain.
Be aware of the destroy date of your tank which is located on
the side of the handle.
Be aware of and discard the tank before the destroy date.

REPLACEMENT PARTS LIST

# Part #
1 W10055
2 W10056
3 W10057

PARTS DIAGRAM

INDUSTRIAL GRADE
AIR HOSE
STANDARD TIRE
AIR CHUCK
PRESSURE
GAUGE
4
4ft. Air Hose with Chuck
SAFETY PRESSURE
BYPASS VALVE WITH
MANUAL OVERRIDE
ADJUSTMENT DIAL
FILL STEM (Connects to standard
compressed air source)
Description
Air Tank Gauge
Air Tank Manifold
On/Off AIR