Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
01. Press the button on the NEW transmitter for at least 3 seconds
and then release
02. Press the button on the OLD transmitter 3 times slowly
03. Press the button on the NEW transmitter slowly and then
release
If there are other transmitters to memorise, repeat the above steps
for each new transmitter
4.3 -
Deleting a single transmitter
from receiver memory
A single memorised code can be deleted as follows:
01. Press and hold down the receiver button for at least 6 seconds
02. Release the button when the Led starts flashing rapidly
03. Within 10 seconds hold down any button on the transmitter to
be deleted, for at least 2 seconds
If the procedure was performed correctly, the Led will flash 3 times
after a few moments.
4.4 –
Deleting all memorised
transmitters
All the memorised codes can be deleted as follows:
01. Press the receiver button and hold it down
02. Wait for the Led to light up, then wait for it to flash rapidly; then
wait for it to switch off and then flash 3 times
03. Release the button exactly during the third flash
If the procedure was performed correctly, the Led will flash 5 times
after a few moments.
5.
Disposal of the
product
This product constitutes an integral part of the automation system,
therefore it must be disposed of along with the latter.
Likewise for installation operations, when the product reaches its
end-of-life, decommissioning operations must be performed by
qualified personnel.
This product is made up of different types of material, some of which
can be recycled while others must be disposed of. Seek information
on the recycling and disposal systems available in your area for this
product category.
CAUTION! - Some parts of the product may contain pol-
lutants or hazardous substances that could cause serious
damage to the environment or human health if released into
the environment.
As indicated by the adjacent symbol, it is strictly
forbidden to dispose of this product together with
domestic waste. Therefore, implement separate
waste collection criteria for disposal according
to the regulations in force in your area, or return
the product to the dealer when purchasing a new
equivalent version.
CAUTION! - Local legislation may include the applica-
tion of serious fines in the event of improper disposal of this
product.
2
6.
Technical
specifications
Nice S.p.a., in order to improve its products, reserves the right to
modify their technical specifications at any time without prior notice.
In any case, the manufacturer guarantees their functionality and suit-
ability for the intended purposes.
All the technical characteristics refer to a room temperature of 20°C
(±5°C).
Decoding
Frequency
Input impedance
Outputs
Sensitivity
Working temp.
KING
433.92MHz
52 Ohm
4 (on connector RXK1)
better than 0.5µV
-10°C - + 55°C
Publicidad
Tabla de contenido
