Remaining Video Recording Shots; White Balance; Parameters Setting; Frequency - Nilox F-60 RELOADED + Manual Para El Usuario

REMAINING VIDEO RECORDING SHOTS

Signals the time remaining on the microSD card if recording videos and the number of shots if, vice
versa, in photo mode.
This obviously depends on the memory card and type of resolution used.

WHITE BALANCE

This lets you achieve higher brightness and colour saturation depending on the light conditions.
Possible choices are:
• Automatic.
• Daylight.
• Cloudy.
• Fluor.
• Tungsten (internal traditional incandescent bulb).

PARAMETERS SETTING

This lets you set a series of additional parameters on your F-60 RELOADED +.

FREQUENCY:

Lets you define the transmission frequency to an external device.
Possible choices are:
• 50 HZ, 60 HZ

UPSIDE-DOWN:

Lets you invert the video and photo view on the cam.
This function is especially helpful if you hand the cam upside-down (as, for example, a Dash-cam in
a car)
Possible choices are:
• On, Off

VIEW PHOTOS AND VIDEOS

Lets you see the photos and videos saved on the cam memory.
Details of this function will follow below.

SHOOT BUTTON

Lets you take videos and photos; pressing the same button again stops video recording.

CURRENT MODE AND STATUS SWITCH

Displays whether the cam is running in video or photo mode. Press the icon to switch the cam from
one mode to another. The displayed icon consequently changes.
18