Precautions For The 3M Dual-Side Foam Tape - Nilox F-60 RELOADED + Manual Para El Usuario

• Do not put the case in a place where it is exposed to corrosive acid or alkaline gases and
keep it away from chemical or corrosive substances.
• To prevent deformation, do not store the product for long periods in a place where
temperatures are high (over 50°C) or low (-10°C).
• Do not expose to direct sunlight for long periods to prevent deterioration of waterproofing.
• Before every use, ensure that the O-ring is intact, that there are no foreign bodies on the
seal, that the case is properly sealed and that the seal is watertight.
• After use in salt water, immediately rinse the case under running water.
• Use a dry cloth to dry the surface and store the device in a dry and ventilated place.

PRECAUTIONS FOR THE 3M DUAL-SIDE FOAM TAPE

When using the 3M dual-side foam tape, adhere to the following precautions:
• Before fixing the 3M dual-side foam tape, select a proper surface to ensure proper contact
between the foam tape and the surface.
• Before using the 3M dual-side foam tape, clean the surface and heat the foam tape, using for
instance an electric blower, especially in a place where temperature is lower than 0°C.
Before using F-60 RELOADED + video camera, pay attention to the following notice
information:
• During continuous use, the body temperature of F-60 RELOADED + video camera increases.
The situation is normal. The camera surface may be hot after prolonged use.
• If the video camera is not used for a long time, remove and keep the battery properly and
recharge it every three months to ensure the battery performance.
• Shooting view angles are slightly different in different working modes of the video camera.
• If a video file is large in size, a computer or other professional players are preferred for a
smooth playback.
• Cyclic recording and frequent recording/deleting operations may leave data fragments in the
SD card, causing failure to file recording or saving. To solve this problem, just backup the
data on an external storage and format the SD card.
20