Honeywell VisionPRO TH8000 Serie Manual De Uso página 5

VisionPRO ® TH8000 Series
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to
do is set the time and day. Then check the settings below and change if
needed:
1 Set clock......................................................................................See page 6
2 Select fan setting: Preset to Auto ........................To change, see page 7
3 Select system setting: Preset to Heat ..................To change, see page 8
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ..................................To change, see pages 10-13
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 12-14).
3