Using Different Dialing Methods; My Pcs Phone Number - Sanyo Sprint SCP-4900 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Different Dialing Methods

Prepend Dialing
Prepend dialing allows you to alter a phone number in your Phone Book
by adding additional numbers. For example, if your Internal Phone Book
entry was entered without an area code and you are out of town, you can
prepend that entry with the appropriate area code.
Highlight the phone number stored in Phone Book entry or call history
1.
using one of the previously described methods.
Press
(right softkey) to display the menu options.
2.
Options
Highlight
and press
3.
Prepend
Enter the digits you wish to prepend.
4.
Press
or
.
5.
or
Press
to display the menu options, then highlight
and press
Call: Speaker On
Using Speed Dial
With this feature you can dial Internal Phone Book entries with one key
press for locations 2-9. Save your memory locations 2-9 for speed dialing
or your most commonly used phone numbers. Speed dial numbers must
be stored in your Phone Book to use this feature.
To store a speed dial number:
Press
of the Navigation key.
1.
Highlight the Internal Phone Book entry which you want to set a speed
2.
dial number.
Press
.
3.
Select the box under the phone number you want to set a speed dial.
4.
Press
(right softkey) to display the menu options.
5.
Options
Highlight
6.
Set Speed Dial
To select a corresponding speed dial number from 2-9, highlight an
7.
unassigned number and press
OR
From the Standby mode, press
1.
Section 2: Understanding Your Phone
90
2G: Using the Internal Phone Book
.
or
Call
.
and press
.
.
to display the main menu.
Highlight
and press
2.
Phone Book
Highlight
and press
3.
Speed Dial #s
To select a corresponding speed dial number from 2-9, highlight an
4.
unassigned number and press
Highlight the entry from the list and press
5.
Select the phone number you want to set a speed dial, and press
6.
To use speed dial:
From the Standby mode, press and hold the appropriate key that
1.
corresponds to the memory location for approximately two seconds.
OR
From the Standby mode, press the appropriate key, and then press
1.
or
.
The display confirms that the number has been dialed when it shows
.
Connecting

My PCS Phone Number

To display your phone number:
From the Standby mode, press
1.
Highlight
, and press
2.
Phone Book
Highlight
, and press
3.
My Phone#
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book
.
.
.
.
.
to display the main menu.
.
.
91

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido