Robern FAIRHAVEN Instrucciones De Instalación página 5

How to Recess Mount
IMPORTANT!
The rough opening must be must be framed
on all four sides and at least 3 ¾" (95.2 mm).
Overall rough-in dimensions should be 18 1/2"
x 29 1/4" (469.9 mm x 742.9 mm).
When using an Electrical option for
NOTE:
recess mount cabinets, electric wire must be
roughed-in prior to installation (see "Wiring an
Electrical Option" on page 6).
NOTE: When partially recessing the cabinets
(for example, installing the 6" (152.4 mm)
deep cabinet into a 4" (101.6 mm) deep open-
ing), follow the instructions provided with the
MPSK40-D2 or D4 Side Kit.
1. Place the cabinet into the rough opening and make
2. Install the provided screws (SS674) through the top
3. For cabinets with an Electrical option, make the elec-
4. Install shelves as shown in "Final Assembly" on
Figure F
CABINET
5
sure the cabinet is level.
You may need assistance from another
NOTE:
person to support the door during step 2.
mounting hole on each side of the cabinet and screw
into the wall stud as shown in Figure F. Do not over-
tighten screw.
trical connections (see "Wiring an Electrical Option"
on page 6 for more information).
page 7.
#10 X 2" (50.8 mm)
SMS/ WOOD
SCREW
2" X 4"
(50.8 mm X 101.6 mm)
WALL STUD
FAIRHAVEN Cabinets 03/30/07