Safety Notes - Chauvet Professional Epix Strip Tour Guía De Referencia Rápida

ÉPIX Strip Tour QRG
About This
Guide
Disclaimer
LIMITED
WARRANTY

Safety Notes

Contact
What Is
Included
The ÉPIX Strip Tour Quick Reference Guide (QRG) has basic product information such
as connection, mounting, menu options, and DMX values. Download the User Manual for
the ÉPIX Drive 900 from
The information and specifications contained in this QRG are subject to change without notice.
FOR WARRANTY
CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico:
registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under
normal use, for the period specified in, and subject to the exclusions and limitations set forth in
the full limited warranty on our website. This warranty extends only to the original purchaser of
the product and is not transferable. To exercise rights under this warranty, you must provide
proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES. This warranty gives you specific legal rights. You may also have other rights
that vary from state to state and country to country. This warranty is valid only in the United
States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
DO NOT open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
•
completely disconnect the product from power via breaker or by unplugging it.
CAUTION: This product's housing may be hot when lights are operating.
•
Mount this product in a location with adequate ventilation, at least
•
20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while
•
operating or connected to power.
CAUTION: When transferring product from extreme temperature environments,
•
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
USE a safety cable when mounting this product overhead.
•
DO NOT operate this product outdoors or in any location where dust, excessive
•
heat, water, or humidity may affect it. (IP20)
DO NOT operate this product if the housing, or I/O ports appear damaged. Have
•
the damaged parts replaced by a Chauvet certified technician at once.
• DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to an ÉPIX Drive 900.
•
ONLY use the hanging/mounting bracket to carry this product.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
•
product at higher temperatures.
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico,
contact your distributor to request support or return a product. Refer to
end of this QRG for more information.
ÉPIX Strip Tour
•
White Frost Filter
•
Quick Reference Guide
•
www.chauvetprofessional.com
REGISTRATION AND
2
for more details.
COMPLETE TERMS
www.chauvetlighting.com/warranty-
Contact Us
EN
AND
at the