Chauvet Professional Epix Strip Tour Guía De Referencia Rápida página 6

ÉPIX Strip Tour QRG
Series
Attachment
Instructions
1
The ÉPIX Strip Tour can be attached in an end to end formation to create a strip up
to 4 meters long from just one rigging point. Do not connect any more than
4 ÉPIX Strip Tours products in a row when hanging vertically.
1. Loosen the 2 fastening eye bolts.
2. Slide the connecting bracket out until it stops and tighten the eye bolt closest
to the center of the product.
3. Slide the second ÉPIX Strip Tour into the connecting bracket and tighten the
remaining eye bolt.
4. Attach the safety cable as shown in fig. 3.
Eye Bolt
3
Be sure to install the safety cable last when attaching the products in series.
2
6
EN