Precision PA1230B Manual Del Usario página 2

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF
THIS SPEAKER. DO NOT TRY TO MAKE ANY REPAIRS OR MODIFICATIONS TO THIS
SPEAKER BY YOURSELF. ALL SERVICES MUST BE PERFORMED BY A QUALIFIED
TECHNICIAN.
• The symbol represented by a ray with an arrow within an equilateral triangle is intended to
alert the user about dangerous voltage within the unit that may be of sufficient magnitude
to constitute a risk of electric shock to people. Users should take extra care when this
symbol appears in this manual and should take every care described.
• The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important instructions for maintenance (services) and the use of this device.
IMPORTANT SAFETY PRECAUTIONS
.
1 Read all instructions before first use.
.
2 Keep this manual for future reference.
.
3 Obey all alerts.
4 . Follow all instructions.
5 . WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or
moisture. Do not store and operate this product near liquids.
.
6 Clean only with a dry cloth.
7 . Do not store or operate this product near any heat sources such as radiators, heaters,
stoves or other appliances that produce heat. Keep this product in a well ventilated place.
.
8 Do not ignore the safety purpose of the polarized or grounding plug. A polarized plug has
two blades, with one being wider than the other. A grounding plug has two blades plus a
round pin to ground. The wide blade or the third prong is intended to provide security. If
the provided plug does not fit into your outlet, consult an electrician to replace the outlet.
.
9 Protect all wires connected to this unit from being walked on or pinched, particularly at
the electrical outlet and the point where the cord exits the unit. When unplugging from the
electrical outlet, grasp the plug and do not pull the cord.
10 . Disconnect the unit during lightning storms or when is not going to be used for a long
period.
.
11 Keep this unit off when connecting all the devices connected to it.
12 . Connect all your equipment with low volume level. Once all devices are connected,
slowly increase the volume or level controls to the desired volume.
.
13 Before placement, installation, or assembly of any product, inspect all equipment,
suspension, cabinets, transducers, brackets and associated equipment. Any missing
component, corroded, deformed, or with non-nominal load can reduce the intensity,
placement and arrangement of the installation significantly. Any of these conditions can
reduce the safety of the facility and must be corrected immediately. Use only suitable
equipment for the loading conditions of the installation. Avoid any possibility of
unexpected overload, and never exceed the capacity of the material or equipment.
.
14 Consult a licensed professional to install the equipment and make sure that all local,
regional and national regulations related to security are understood and adhered to.
15 . All services should be performed by qualified professionals. Servicing is required when
the apparatus has been damaged in any way, if the power cord or its plug are damaged, if
the machine makes contact with liquid, if any object is inserted into the unit, if the unit is
exposed to rain or moisture, or if the unit does not operate normally, or has been
dropped.
BE SURE TO FULLY CHARGE THE BATTERY THE FIRST TIME TO INCREASE BATTERY
DURABILITY.
WARNING !
1