Precision PA1230B Manual Del Usario página 4

1. When the unit is fully charged, the LED will light up steady in green.
2. Master Level Volume Control: Turn this knob to adjust the master volume.
3. Power & Bluetooth Indicator: The power indicator will light up steady when
the unit is ON or when charging when the unit is off. The Bluetooth indicator
will light up steady when connected or flash slowly in BT playback, and will
flash quickly when pairing.
4. Treble adjustment: Turn this knob to adjust the treble.
5. Bass adjustment: Turn this knob to adjust the bass.
6. Microphone Echo Knob: Use this knob to adjust the echo for the microphone
input.
7. Microphone Volume Knob: Turn this knob to adjust the microphone volume
level.
8. Guitar Volume Knob: Turn this knob to adjust the volume level of your guitar.
9. AUX Input (RCA): The RCA Input is designed to connect directly to a
CD/DVD/TV or any other stereo level audio device.
Please note that there are two LINE (AUX) Inputs, RCA and 1/8". If both the
RCA and 1/8" inputs are connected, the unit will automatically play from the
1/8" line input.
10. IR remote receiver.
11. Previous Track Button: When on USB/SD/Bluetooth mode, press this button
to move to the previous track. Hold it down to reduce the volume.
When on FM mode, press this button to move to the previous stored
channel.
12. Input Mode Button: Press this button to toggle between the various inputs
(LINE, USB, SD, FM & Bluetooth).
13. Play & Repeat Button & Play/Pause Button: When on USB/SD mode, press
this button to pause or play. Hold it down to select the repeat modes for
USB/SD. When on Bluetooth mode, press this button to pause, hold it down
to disconnect pairing, and then enter pairing mode.
When on FM mode, press this button to mute, hold it down for auto scan.
14.Next Track Button: When on USB/SD/Bluetooth mode, press this button to
move to the next stored track. Hold it down to increase the volume.
When on FM mode, press this button to move to the next stored channel.
15. USB/SD card port: Connect your USB or SD device here. The speaker will
only play music files from USB/SD input. Do not connect your computer to
this port, as it will not play files directly from a computer.
Note: This unit will keep repeating all songs in USB and SD by default.
Important: The USB port is intended only for data transfer; other devices
cannot be used with this USB connection. The use of USB extension cords is
not recommended.
3