Remote Control - Precision PA1230B Manual Del Usario

16. Power button: There are three possible settings. Setting the unit to DC (BATT) will
allow the unit to play using only the internal battery. When set to AC, the unit will be
powered by an external power supply (electrical outlet) even if the battery is dead.
*In AC setting, the unit will still be charging, but it will do it very slowly. To charge the
unit properly, set the unit to OFF.
17. DC 12V IN is for connecting to a12V external battery if needed. Make sure to
connect positive to positive (red +) and negative to negative (black - ).
18. AUX (1/8"): This input is designed to connect directly to an Mp3 player or any other
stereo audio device.
19. Guitar Input (1/4"): Connect a guitar to this guitar input terminal.
20. Microphone Input (1/4"): Connect a microphone to this microphone input terminal.
21. AC Connection: Connect the power cord to an AC outlet.
22. Antenna is for receiving the FM signal. Before use, extend the telescopic FM
antenna. Pack up the FM antenna to better protect it after use.
23. LED LIGHT SWITCH: Setting the button to ON will allow the LED light on. When set
to OFF , the LED light will off.

REMOTE CONTROL

1. POWER: Press this button to stand by ON/OFF
the unit. Four dots (- - - -) are displayed when in
standby.
2. INPUT: Press this button to toggle between the
various inputs: LINE (AUX), USB/SD, FM,
Bluetooth.
3. KEY Number for selecting the tracks for
USB/SD or stored channel in FM.
4. MUTE: Press this button to mute.
5. VOL+: Press this button to increase the volume.
6. VOL-: Press this button to reduce the volume.
7. CH-/ :Press this button to select the previous
track or stored channel for USB/SD/ Bluetooth/
FM. When on USB/SD mode, hold this button to
fast backward.
8. CH+/ : Press this button to select the next
track or stored channel for USB/SD/Bluetooth/
FM. When on USB/SD mode, hold this button to
fast to forward.
3
7
11
4
5
6
10