Billy Goat PW30AOV Guía De Configuración Rápida página 4

PW30AOV QUICK SETUP GUIDE
STOP PRESSURE WASHER
1. Release spray gun trigger and let engine idle for two minutes.
2. Move throttle lever (T) to SLOW position, then STOP position. (See Fig. 13)
3. Move fuel valve lever (S) to "Off" position. (See Fig. 12)
4. Turn off water supply.
5. Point spray gun in safe direction, press red safety button, and squeeze spray
gun trigger to relieve retained high water pressure. Spray gun traps high water
pressure, even when engine is stopped and water is disconnected.
6. Disconnect garden hose from pump.
7. Disconnect high-pressure hose from pump and gun for storage. For long term
storage instructions, see operator's manual.
8. Remove safety goggles.
Part No 210501
4
Fig. 13
Fig. 14
Fig. 15
Form No F120115A