Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
1. Install downrod and wiring harness
Align holes on downrod with holes on motor bracket. Secure downrod with the M6 x
32 mm bolt and M6 nut (Fig. 1.1).
Fig. 1.1
M6 Nut
M6 x 32 mm Bolt
Connect wiring harness from downrod to receptacle from motor unit (Fig. 1.2).
Fig. 1.2
Wiring Harness
1
© 2020 DELTA T LLC Ι ALL RIGHTS RESERVED.
Publicidad
Tabla de contenido
