Publicidad
BLOWING
2
1
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the
instructions listed.
1.
Verify switch is in the "O" (OFF) position before unplugging
the power cord from the outlet.
2.
Make sure the canister is empty before using the blower.
3.
Remove outlet hook from back of the vacuum.
4.
Insert blower hose.
5.
Insert plug into the socket.
6.
Before turning on the vacuum, rmly hold loose end of the hose.
Turn the motor on by ipping the switch to the "I" (ON) position.
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH
ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER.
WARNING:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT
MIGHT BE INHALED.
12 Gallon Wet & Dry Vacuum
3
4
5
Vacuum
Back Side
6
ENGLISH
13
Publicidad
