Publicidad
Idiomas disponibles
Idiomas disponibles
o.k.
Picture L:
6m
Movement detector
Range at an indication of:
15°
15°
Inclination angle of 15°
seen from the side
2,5m
0 1
5
10
15
20m
0 1
5
10
15
19 20m
6m
5
4
3
Inclination angle of
2
15°seen from the top
1
0
1
120°
2
3
4
5
6m
How to use the halogen floodlight projector
Installation of the bulb
1. Make sure that the projector is not connedted to the power network.
2. Remove the upper screw from the projector's casing and remove the front glass.
3. Take the bulb out of its packaging. Do not touch the bulb with your bare hand. Use a towel to fix
the bulb into the fitting. First press one side of the fitting against the metal pin
and shift the pin backwards so that you can press the other side of the bulb against the metal pin.
4. After changing the light bulb, please pay attention to the correct positioning of the seal.
5. Fix the front glass with the screw.
A.
min. 95°
Picture M:
not o.k.
6m
Movement detector
60°
60°
Inclination angle of 60°
seen from the side
2,5m
3
4
5m
0 1
2
0 1
2
3
4
5m
6m
5
4
3
Inclination angle of 60°
2
seen from the top
1
0
1
120°
2
3
4
5
6m
B.
1.
Installation
1. Eliminate any voltage and check whether there is
really no voltage left
2. Pull the cable through the sealing opening. Check
carefully whether the sealing opening is correct so
that the device will be splash-proof.
3. Installation according to picture attached.
4. Check carefully whether the pull relief works
properly and use the pull relief in an appropriate
manner.
5. Fix the cap horizontally and screw it together so
that the device will be splash proof.
green/yellow blue
C.
2.
max. 175°
black/brown
N
L
Publicidad
