Necchi NHW9002 Manual De Uso página 21

19
Supplied / Components
1 Brush
2 Regulation lever for smooth floors, rugs
or carpet
3 Flexible suction tube
4 Rigid, telescopic suction tube
5 Suction power regulation device (air
valve)
6 Cover of dust collection container
7 Button to remove dust collection contai-
ner
8 Handle
9 Dust collection container with HEPA fil-
ter
10 Stop buttons to release suction tube
11 Clasp device for rigid, suction tube (rest
position)
12 Locking button to regulate rigid, tele-
scopic tube
13 ON/OFF pedal switch
14 Suction power electronic regulator
15 Pedal button to wind cable
16 Cable with plug
17 Grid covering air release filter
18 Brush for hard floors (only for mod.
NHR9001). Parquet brush with nat ral
bristles (only for mod. NHW9002)
19 2 in1 combined opening (nozzle and
brush)
20 Turbo brush (only for mod. NHR9001
and NHW9002)
21 Clasp device for rigid, suction tube (rest
position)
22 Button to open and empty dust collec-
tion container
23 Protective grid for HEPA filter
24 HEPA filter
25 Protective clamp on motor filter
26 Air discharge filter
Danger of damage!
Never vacuum up earth,
lime, cement, road stone or
drilling dust.
These materials could clog the filter and
damage the motor.
This type of damage is not covered by
the guarantee.
ATTENTION: EMPTY THE CONTENT
AFTER EACH USE AND REGULARLY
CLEAN THE HEPA FILTER
Filter cleaning
To guarantee constant suction power, it is
necessary to regularly clean the HEPA fil-
ter (see fig. 8-9). Wash the HEPA filter only
using clean water or use a compressed air
jet. Never use any type of detergent. For
persistent dirt use an old toothbrush to
clean the internal and external filter folds.
USER MANUAL