Explanation Of Symbols - Necchi NHW9002 Manual De Uso

23

EXPLANATION OF SYMBOLS

Dual insulation
·
Preparation
Insert the opening, the rigid, telescopic
·
tube and the flexible suction tube (see
fig. 1).
Set the desired length of the rigid, te-
·
lescopic tube with the help of locking
button 12
Extract the cable (maximum up to the
yellow coloured marking). The red co-
loured marking indicates the cable is
·
fully extracted; further tightening could
damage the drum.
Insert the plug into a 220 240V / 50/60
Hz socket
·
Use
·
Switch the device on/off using the
ON/OFF pedal switch 15
Adjust the brush for the floor, using the
regulation lever:
·
A: bristles in for smooth floors.
B: bristles out for rugs and carpet.
If necessary, insert the "combined 2 in
1 opening" instead of the brush. The
·
opening can also be inserted directly
on the flexible suction tube.
Set suction power using the air valve,
or using the electronic suction power
regulator 14
Open air valve: low suction power (cur-
tains, delicate fabric)
Closed air valve: high suction power (flo-
ors, rugs, carpet).
·
Move the device using the specific
·
transport handle. Never lift by grabbing
the flexible suction tube.
To temporarily park the vacuum clea-
ner, use the park position (see fig. 1A);
to put away when work is complete
use the rest position (see fig. 1 B)
Danger of lesions!
DANGER
The fast winding of the cable
can cause a "whip effect (the
cable can violently knock un-
controllably). To wind the cable, hold it
and press the pedal button. During
winding, let the cable slide from you
hands.
USER MANUAL