Initial Setup; Bluetooth Operation - Crosley CR3036D Manual De Instrucciones

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the USB Cable to the Power Jack of the unit.
Charging/Power Source
1. This unit has a built in rechargeable battery.
2. Connect to a PC, Laptop or 5V USB adaptor with the provided USB cable.
3. The Charging Indicator will be red when charging, and change to green when
fully charged.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, turn on the unit, set the Function Knob to Aux mode,
connect a 3.5 mm auxiliary cable between your audio device to the Aux In Jack
of this unit and start playing the music.
Note:

Press the Mode Button to switch from Aux to Bluetooth.

When in Aux Mode, the Function Indicator will be green.

Bluetooth Operation

1. Set the Function Knob to Bluetooth mode
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3036D" and pair.
3. Once your device is successfully paired with the unit.
4. Play and stream music from your device to the unit.
5. During the playback, press the Play/Pause Button to suspend and resume
playback.
6. During the playback, press the Backward Skip Button or the Forward Skip
Button for the previous or next song.
Note:
 Press the Mode Button to switch from Bluetooth to Aux.
 When in Bluetooth Mode, the Function Indicator will blink blue.
 If the cable is inserted during Bluetooth Mode, AUX will take priority.
5