Initial Setup; Radio Operation - Crosley CR3003A Manual De Instrucciones

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect AC adaptor to the Power Jack of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speaker. To do this, rotate the Function Knob to Aux In mode, connect the
3.5mm auxiliary cable between your audio device and the Aux In Jack of this
unit and start playing.

Radio Operation

1. Rotate the Function Knob to FM or AM position.
2. Rotate the Tuning Knob for desired radio station.
Note:
 The unit is equipped with a FM antenna. To FM improve reception, move the
antenna around until the reception is clear without interferences.
 The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
Troubleshooting
There is no power
 Power adaptor is not connected correctly.
 No power at the power outlet.
There is no sound
 Function Knob is in the AUX position
5