Klarfit Husky Vario Manual De Instrucciones página 15

Mounting the wheels
Insert the outer part of the wheel axle into the inner part of the axle. The
wheels are locked when you sense that they are locking into the suspension
on the axle tube. The wheels can be removed and pulled out of the axle tube
simply by pressing the button on the spring mechanism on the underside of
the axle.
Attaching the trailer hitch
To attach the trailer hitch, slide the round end into the holder provided for
this purpose (Fig. 1) on the left side. Secure the inserted drawbar with the
supplied quick release (Pos. a) and the locking pin (Fig. 2). The curvature in
the trailer coupling is now directed to the right in relation to the direction of
travel.
Note: Make sure that the locking pin is securely seated as a loose drawbar
may cause you to lose control of the trailer while driving.
EN
15