ASSEMBLY INSTRUCTIONS
20. Attach the big roof panel covers 1 (M1) to the big top
assembly using short screws (AA) and flat washers (BB).
Tighten with Phillips screwdriver.
Hardware Used
M6 x 15 Short Screw
AA
BB
FF
M6 Flat Washer
21. Connect the big roof panel covers 3 (M3) to big roof
panel covers 5 (M5) using short screws (AA) and flat
washers (BB). Tighten with Phillips screwdriver.
Repeat this procedure to assemble the big roof panel
covers 2 (M2) to the big roof panel covers 4 (M4).
Hardware Used
M6 x 15 Short Screw
AA
BB
M6 Flat Washer
22. Insert the big roof panel covers (corner) (O) onto the
bottom border of the small top, securing with medium screws
(FF) and flat washers (BB) on each corner. Then attach the
big roof panel covers (middle) (P) using medium screws (FF)
and flat washers (BB). Tighten with Phillips screwdriver.
Hardware Used
BB
M6 Flat Washer
FF
M6 x 35 Medium Screw
20
x 8
x 8
21
x 32
x 32
22
x 16
x 16
15
AA
BB
M1
AA
AA
BB
M3
BB
AA
BB
M5
FF
BB
O
FF
BB
AA
BB
FF
BB
FF
P
BB