Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
CAUTION: This appliance has a polarized plug (one blade wider than the
other). To reduce the risk of shock, this plug is intended to fit only one way in
a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in an
electric shock hazard.
Power ON/OFF Button
Plug unit in to a 120 volt AC electrical outlet. Press the POWER ON/OFF
button to turn unit on. Press the POWER ON/OFF
ATTENTION: When the water in the water tank is almost empty the power to
the unit will shut off to indicate to the user to refill water.
Mist Adjustment Setting
Mist adjusts from Lowest output to Highest output. To increase the mist output,
turn the MIST adjustment knob clockwise. To decrease mist output, turn the
MIST adjustment knob counter-clockwise.
button again to turn unit off.
8
Mist Temperature Setting
When the humidifier is powered ON, it will be operating on the default setting,
Cool Mist. To change the Mist Temperature from Cool Mist to Warm Mist, press
the WARM MIST
button. The mist temperature will change to Warm Mist,
and WARM MIST button will be lit red. To change the Mist Temperature back
to Cool Mist, press the WARM MIST button again. The mist temperature will
change to Cool Mist, and the light in the WARM MIST button will turn off.
NOTE: Once warm mist is selected, it will take 20 minutes to heat up before the mist
becomes warm.
Night Light
Press the NIGHT LIGHT
button to turn on the tank light. The light around the
mist knob will illuminate. Press the NIGHT LIGHT button again to turn the night
light off.
9
Publicidad
Tabla de contenido
