Regalo 1350 Instrucciones De Instalación página 4

STEP 2
Position the play yard into your desired configuration (e.g. octagon,
square), then join the free ends of the play yard together at the plastic
joints.
STEP 4
Reassemble the upper locking joint by adding one of the previously
removed toothed disks and locking knobs.
STEP 3
Insert one of the previously removed metal pivot bars through the
opening created by joining the upper plastic joints. Guide the metal
pivot bar downward into the circular housing on the lower plastic
joint.
STEP 5
Tighten each of the locking knobs by turning them clockwise, fixing the
play yard into the configuration you have chosen. To position the play yard
into a new configuration or shape, simply loosen each of the locking
knobs, adjust and retighten.
NOTE:
When adding or removing additional panel units to the
configuration, panels must be added or subtracted in sets of two for
the freestanding enclosure to function properly.