Metra 95-7521B Instrucciones De Instalación página 4

5. Unclip and remove the shifter
trim panel. (Figure D)
6. Slide both seats forward and remove
(2) Phillips screws on each side of the
center console under the screw covers.
(Figure E)
7. Unclip and pull back the panels at the
lower front sides of the center console.
(Figure F)
8. Remove (2) Phillips screws from both
sides (total of 4) of the front lower half
of the center console. (Figure G)
Continued on next page
(Figure D)
95-7521B
Dash Disassembly
4
(Figure E)
(Figure F)
(Figure G)