Metra 95-7521B Instrucciones De Instalación página 5

9. Unclip and remove the vent panel
including the hazard switch above the
factory radio. (Figure H)
10. Unclip the entire center console and
slide it towards the rear of the vehicle to
gain access to the (2) Phillips screws on
the bottom of the a/c control. (Figure I)
11. Remove the (2) Phillips screws from the
a/c control then unclip and remove the
control. (Figure J)
12. Remove (3) Phillips screws and
(1) 10 mm bolt securing the radio.
(Figure K)
Continue to kit assembly
(Figure H)
95-7521B
Dash Disassembly
5
(Figure I)
(Figure J)
(Figure K)