Troubleshooting; Replacement Parts; Service And Repairs - Bostitch BTE360 Manual De Instrucciones

Problem
• Unit will not start.
• Broken blade stuck
inside clamp.
For assistance with your product, visit our website at www.bostitch.com. for a list of
service centers, or call the Bostitch Customer Care Center at (800) 262-2161.
MAINTeNANce
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.

RePlAceMeNT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our service
website at www.bostitch.com. You can also order parts from your nearest Bostitch
Factory Service Center or Bostitch Authorized Warranty Service Center. Or, you can
call our Customer Care Center at (800) 262 2161.

SeRvIce ANd RePAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information
about Bostitch, its factory service centers or authorized warranty

TRouBleSHooTING

Possible cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Broken blade is held in place
by pin inside clamp.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Bostitch
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
Bostitch service center or
authorized servicer.)
• Have cord or switch replaced
at a Bostitch Service
Center or Authorized Servicer
• Follow the steps under "To
Remove a Broken Blade" to
disengage pin.
8