Operating Safety Precautions - Anderson VERSA-CRIMP BP18CC129ACSR Instrucciones De Seguridad, Funcionamiento Y Mantenimiento

4

OPERATING SAFETY PRECAUTIONS

Tools are NOT insulated for use on or near
energized conductors. Use of these tools
near energized conductors may lead to
electrical shock, causing severe injury or
death.
Blade hazard. Cutter blades move at high
speed and force and can cause severe
personal injury. Keep all body parts
away from moving parts of the tool during
operation.
Blade hazard. Cutter blades have sharp
edges that may cause personal injury while
not in use or during blade replacement
or installation. Use caution and personal
protective equipment when handling tool
and blades.
Projectile hazard. Cutter blades may break
during operation due to stress cracks or
misapplication. Always carefully inspect
blades before use to avoid serious personal
injury.
Projectile hazard. Operator must clear all
bystanders from the work area especially
when cutting cable, rebar and groundrod
ends to avoid potential injury to bystanders.
Hydraulic fluid under pressure. Do NOT use
any part of your body to locate a hydraulic
leak. Escaping fluid under pressure can
cause severe injury or death. If injury
results from escaping hydraulic fluid, seek
immediate medical attention to avoid
serious bodily injury.
Do NOT over-reach while operating this tool.
Loss of balance can cause serious personal
injury or death. Move closer to work area
and securely support yourself and your
work. ALWAYS keep proper footing and
balance.
Always clip one end of the lanyard to the safety ring on the
tool and the other end to a secure point to avoid accidental
drop of more than 6 feet. Failure to follow this instruction
may result in personal injury or tool damage.
ANDERSON
Use all appropriate personal safety equipment when
handling, operating, and servicing this tool such as: safety
shoes, hard hat, eye and ear protection, work gloves, and
sleeves.
To help ensure safe operation of this tool, keep all safety
labels clean and legible. Replace labels when necessary
with new labels. Call HUBBELL ANDERSON
Center at: 1-800-426-8720 for replacement labels.
Products
®
Tool Service
®