Mode Select; Time Of Day - CARE FITNESS MED 2040 AeroMagnetic Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34

MODE SELECT

Press the left hand key to select the SPEED, DIST, TIME or CLOCK at the bottom of the display.
RESET/HEART RATE ALARM SELECT
1. Press the right hand key to activate the heart rate alarm. If the alarm is on, the alarm icon will flash and a beep will
sound to indicate that your heart rate is either above or below the selected target zone.
2. RESET: Press and hold the left hand key for 3 seconds. All the accumulated values for AVG SPEED, AVG PULSE,
TIME, DIST, KCAL will return to zero.

TIME OF DAY

1. If you want to change the time of day settings at any time press the left hand key until time of day is displayed,
press the right hand key for 3 seconds. The display will flash an indication of whether the clock is set for 12H clock or
24H time clock. Press the right hand key to change.
2. Press the left hand key to switch to the hour setting, use the right hand key to change hours.
3. Press the left hand key again to switch to minutes and use the right hand key to change the minutes.
4. When you are finished, wait a few seconds for the display to return to the start-up screen.
Setting Workout Time
1. Press and hold the right hand key when the bottom section of the display is showing SPEED; the Minutes will now
be flashing. Press the right hand key to increase Minutes setting.
2. To clear the exercise Time press the left hand key until the time is displayed then hold the right hand key for three
seconds.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2040

Tabla de contenido