Maintenance - miniland baby nano babypur Manual Del Usuario

5.1. TROUBLESHOOTING
The machine may not work properly even though it is not defective if misused.
Please check the following before requesting repair.
Symptoms
When not working
When push button
switch is not working
When filters noticeably
lose their capacity
Other malfunctions

6. MAINTENANCE

6.1. FILTER REPLACEMENT CYCLE
Anion G-Filter in Nano Babypur is permanently usable without needing
replacement.
For e-Nano Filter:
- The filter can be reused 3~6 months after hovering out the pollutant,
(depending on use).
- The performance of the filter will depreciate after reuse. New filters are
recommended after reusing a filter 1~2 times to ensure optimum performance.
- In general after 1 year of use, or sooner if the filter has turned black, it means
it is ready for changing.
Action
· Check if the Power Adaptor is correctly connected
to wall socket and the machine.
· Make sure the original power adaptor included with
the product is used.
Use of a non-authorized adaptor might damage the
machine or cause failure in operation.
· Check if the Power Adaptor is correctly connected
to wall socket and the machine.
· Use in a dry, non oily place.
When filters get moist, dry them. Moist filters might
give a poor performance.
· Contact with MINILAND technical service.