Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Delayed turn-off after vehicle has been turned off
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Connect the Red wire to the aftermarket device's accessory (switched) power wire.
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
AX-SVT Accessory Provider
INTERFACE FEATURES
TOOLS REQUIRED
• Tape • Wire cutter • Zip ties
CONNECTIONS TO BE MADE
• Connect the Black wire to chassis ground.
• Connect the Yellow wire to battery power.
Integrate • AxxessInterfaces.com
AX-SVT
INSTALLATION INSTRUCTIONS
REV. 6/21/18
Publicidad
Manuales relacionados para Axxess AX-SVT
Resumen de contenidos para Axxess AX-SVT
- Página 1 AX-SVT INSTALLATION INSTRUCTIONS AX-SVT Accessory Provider INTERFACE FEATURES • Provides 12-volts DC output when voltage is at or above 13.5-volts DC • Designed for vehicles that do not provide accessory (switched) power • 10-amp fuse included for safety • Provides accessory power (13.5-volts 10-amps) •...
- Página 2 AX-SVT INSTRUCCIONES DE INSTALACIÓN Proveedor de accesorios AX-SVT CARACTERÍSTICAS DE LA INTERFAZ • Proporciona una salida de DC de 12 voltios cuando el voltaje es igual o superior a 13.5 voltios DC • Diseñado para vehículos que no proporcionan energía accesoria (conmutada) •...