Routine Care - BOND MANUFACTURING HYFP20018-10 El Manual Del Propietario

TO LIGHT
Before each use, inspect all parts.
*After assembling the gas tank, push and turn the Control Knob counter-clockwise, then use a match or a lighter
to light the firebowl. To adjust the flame, turn the Control Knob. Push and turn the Control Knob clockwise to
turn the flame off.
TO EXTINGUISH
※ Push the Control Knob and turn clockwise to the "OFF" position.
※ Disconnect propane cylinder to close the gas supply if not for use in a long time.

ROUTINE CARE

※ Keep your firebowl free and clear from combustible materials.
※ Visually inspect burner from obstructions, keep tank enclosure free and clear from debris.
※ After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains,
loose dirt and soil. Wipe with a soft cloth.
STUBBORN STAINS
※ Stubborn stains,discoloration and possibly rust pitting can occur from exposure to harsh outdoor
conditions 。
※
Be careful not let any powder or solvent come in contact with painted or plastic components as damage may
occur.
MAINTENANCE
※ Store the firebowl in a cool dry place away from direct sunlight.
※ The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored indoors.
※ Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise may void the warranty of this
product and result in a hazardous condition.
※ Please contact the Manufacturer for information regarding replacement parts and lava rocks, etc.
IF YOU HAVE QUESTIONS OR CONCERNS
PLEASE CALL BOND TOLL FREE #
1-866-771-BOND(2663) OR TO BETTER
EXPEDITE YOUR REQUEST FEEL FREE TO EMAIL US
customerservice@bondmfg.com
OR LOG IN TO OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
www.bondmfg.com
BOND MANUFACTURING CO.
1700 West 4th Street Antioch, CA 94509 USA
8