Publicidad
Idiomas disponibles
Idiomas disponibles
1 . Operating features of the instrument
E
-
The instrument has two operating modes: basic functions (direct access) and advanced functions.
MODE
In addition to the confi guration functions, 2 working reference functions can be accessed, in MIN, MAX and
DELTA (TIR) mode, plus Tolerance display or input of a multiplication factor other than 1:1
(see Chaps. 3 and 4)
-
The «favourite» key gives direct access to the function used most often (see Chap. 6)
-
Sets a Preset value, verifi es a selection, and controls switching off the instrument.
SET
By default, SIS mode enables automatic switch-off with no loss of origin (see Chap. 7).
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see Chap. 9)
- RS232 commands
Direct RS232 to 4800 Baud connection, 7 bits, even parity, 2 stop bits
2. Start
Press a button. When used for the fi rst time, the instrument requests selection of the measurement unit
required (MM or Inch). Choose..... then measure.
6
Publicidad
