Work Pro W MD 82 AX MKII Manual De Instrucciones página 11

EN
NOTA 2-
El byte de "Parameter Range" indicates the HPF adjustment value from 6000 Hz (min) to 16000 Hz (max.)
To adjust the Feedback to minimum
To adjust the Feedback to maximum
NOTE 1-
The "channel number" byte indicates the channel operated, in that case, 00 is channel 1, 01 channel 2, 02 channel 3, 03 channel 4, 04, channel 5, 05, channel 6, 06 channel 7, 07 channel 8.
Number upon this value, always operates over the MASTER
NOTE 2-
"Parameter Range" byte indicates the Feedback adjustment value from OFF (min) to 04 (max.)
DATA HEAD PARITY bit Channel Number
FE 0D 00
From CH1 to 8 physic
FE 0D 00
Feedback ADJUSTMENT
ID Number Empty Parameter Range
08 00 00
FeedBack OFF
00 00 04
Empty Empty Empty
00 00 00
00 00 00
Data Tail
FF
FF