Work Pro W MD 82 AX MKII Manual De Instrucciones página 3

1 . 0 Introduction
MD 82 AX MK II is a mixer for microphones which integrates a large series of an active features that allow to
optimize the installation and to out it with multiple audio signal control and management possibilities. This mixer
incorporates 8 balanced inputs. It provides individual input level control and master level.
The encoder in the frontal side allows to navigate through a configuration menu with the different parameters on
each channel. Among the functions to be performed, we can set three tone control, low‐pass and high‐pass filters
(with frequency adjustment) and 4 an ‐feedback levels.
All this information is showed in the LCD display. All inputs have switch to enable the connect on of +48V phantom
power supply microphones. The two features that represent an interesting development are the Auto‐mixer
functionality and the RS485 interface for external commands
1 . 1 Features :
Controlable via Bluetooth through the iPAD app
8 Microphone inputs (with 48V phantom power
◌
Each signal with high cut, low cut
◌
Each signal with AGC
◌
Each signal FBC feedback suppression
◌
Each signal has Three‐band EQ
◌
Two mixed output
◌
RS485 remote control (PC or centre control)
1 . 2 Front control features
1. Input level control knob.
2. Output Master volume control.
3. LCD display. When the light is blue, the AC power has been switched on, and is in a normal state of operation.
4. Encoder control, each channel of the high, bass, high pass, low pass filter, feedback gain control.
5. The output signal display lamp. when the light is green, it has signal input. when the light is red, it is clipping.
For example, when the signal reaches the distortion threshold will light up the red light.
)
2
Find the app in the
AppStore by
searching MD82AX,
install it and control
the device through
your iPad.