Safety Rules; Cooler Setup And Operation - L.B.White PC-31 Instrucciones Y Manual Del Propietario

Safety Rules

1. Read and follow all instructions, cautions, and warnings. Failure to do so could result in personal injury,
death or property damage.
2. Unit must be in the OFF position and UNPLUGGED from power receptacle before performing any
maintenance.
3. Make sure the electrical power source conforms to the requirement of the evaporative cooler(s) as well as
local codes. The power requirement for the PC-31 is 115v, 2.8 amps.
4. To reduce the risk of fire or electrical shock, do not expose electrical connections to water.
5. Do not touch electrically live components.
6. Adequate ventilation is required. When used in enclosed spaces, it is recommended to open a door or
window to draw fresh air in.
7. Assure that all power cords do not come in contact with any sharp edges, hot surfaces or chemicals. Im-
mediately replace any damaged parts.
Starting and using the cooler

Cooler Setup and Operation

PC-31 is pre-assembled and ready to operate. Simply remove the packaging and then carefully remove the
unit from the box. Install Casters. Lock the 2 locking wheels before filling and turning on fan to keep the cooler
from moving from the air velocity.
NOTICE: the cooling pad will have a slight odor when it is new. This is normal. It will dissipate after a period
of time depending on the use time. Draining the tank often during the break-in period will help
speed this up. (See draining tank in section 5)
Filling Cooler or Connecting to Water Supply
Move the cooler to an area where it can be filled
Manual fill method
The cooler can be filled via the front fill door by hose or bucket. Using the water fill indicator to monitor water
level, simply depress the fill door and the spring lock will release and open it. To close, simply push it closed
and locked.
Owner's Manual • Evaporative Cooler
Evaporative Cooler
5