How To Set The Time - Ameriphone BIG TIME Instrucciones De Uso

How to set the time:

Press and hold the SET
CLOCK button down.
Push the HOUR button
until the desired hour
[AM or PM] appears
on the display panel.
Repeat Step 2 using
the MINUTE button to
set desired minute.
How to set the alarm:
Press and hold the SET
ALARM button down.
Push the HOUR button
until the desired hour
[AM or PM] appears
on the display panel.
Repeat Step 2 using
the MINUTE button to
set desired minute.
How to use the Bedshaker:
Plug the Bedshaker into
the "Bedshaker" port
on the back of the Big
Time.
Place the Bedshaker
under a pillow or mat-
tress.
Select SHAKER when
choosing the ALARM
mode.
How to select the ALARM mode:
Slide the ALARM switch to
the Audio or Bedshaker
position.
To interrupt the alarm
momentarily, press the
SNOOZE button. In order for
this feature to work, the Auto
Snooze must be ON (See the
next section for instruction on
adjusting the Auto Snooze).
The alarm will go off again
in nine minutes and stay on,
unless the SNOOZE is
pressed again or the alarm
is turned off.
To shut off the alarm and
stop completely, slide the
ALARM switch to the OFF
position.
How to adjust the Auto Snooze:
Turn the unit around and
locate the AUTO SNOOZE
switch.
Set the switch to ON to
activate the Auto Snooze
feature.
How to adjust the Audio
tone and volume:
Slide the ALARM switch to
the Audio position.
Adjust the volume by
sliding the VOLUME control
bar to the desired level.
Adjust the tone by sliding
the TONE CONTROL bar to
suit your hearing.